Thursday, 1 December 2016

4:30:00 pm

 

See details below
I could  not get the correct specifications needed in Opencast mines. 
Generally we use 6mm thick steel plate , roll to 1.2 m dia. Make an opening door to open outwards. . This will have a conical top . we surround the structure with gunny bags filled with mud. In case of skid mounted we use 10mm plates against 6 mm. More than specifications , locating is of utmost importance
Factors to be considered for locating a Blasters'Shelter
 
Blasting shelters are provided in a mine working area for the blaster and his helper to take shelter and to protect them from being hit by flying fragments at the time of blasting.
 
1. Blaster shelter should be fabricated out of 10 mm thick mild steel plates with stiffeners all around
2. Blaster shelter should be covered with sand bags all around and top, leaving the entrance fully free and without obstructions
3. Blaster shelter should not be used as place to store material and should be completely free
4. Blaster shelter should not be kept on bench edge or places likely to collapse in event of vibration due to blasting
5. Blaster shelter should be placed away from haul road
6. Blaster shelter should be easily approachable with vehicles
7. Door when provided should open outside and designed to remain normally open
 
8. The opening to shelter should be away from the direction of blast
9. The opening should not be close to face in which case stone could hit and re-bounce into the shelter or any stone getting dislodged from the face in vicinity can fall and roll into the shed
 
10. In order to enable to see the blasted area after blast, blaster shelter should be located at higher benches. This will also reduce the distance and height of trajectory
 
11. Blaster shelter should as far as possible located away from the direction of wind to avoid
 
inhalation of after blast fumes
 
12. There should be proper arrangement to take the shot firing cable inside without getting damaged
 
 



On Wednesday, November 30, 2016 5:40 PM, "bp_rajesh rajesh bprajesh_raj@yahoo.co.in [dgms_mail_list]" <dgms_mail_list@yahoogroups.com> wrote:


 
Dear Sir
 There is no attachment with your mail. Pl. send with attachment regarding Blaster's shelter.
 
With Regards Rajesh Kumar Asst.General Manager,(Mining) Cell No:08986602502.


On Monday, 28 November 2016 12:17 PM, "B Arunachalam iyer_arunachalam@yahoo.ca [dgms_mail_list]" <dgms_mail_list@yahoogroups.com> wrote:


 
I could not the correct specifications needed in Opencast mines. 
Generally we use 6mm thick steel plate , roll to 1.2 m dia. Make an opening door to open outwards. . This will have a conical top . we surround the structure with gunny bags filled with mud. In case of skid mounted we use 10mm plates against 6 mm. More than specifications , locating is of utmost importance



On Saturday, November 26, 2016 1:14 PM, "Jubin Mehta mjubin76@yahoo.com [dgms_mail_list]" <dgms_mail_list@yahoogroups.com> wrote:


 
Sir,
pl. download the attachment and go through.

Jubin


On Tuesday, November 22, 2016 3:46 PM, "Being Awesome roy.gaurav1@gmail.com [dgms_mail_list]" <dgms_mail_list@yahoogroups.com> wrote:


 
Respected Sir,
                    Kindly provide me following informations-1-Specification of a Blaster's shelter as permines statute /circular.
Regards,
Gaurav Roy








__._,_.___

Posted by: B Arunachalam <iyer_arunachalam@yahoo.ca>
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (30)

Have you tried the highest rated email app?
With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated email app on the market. What are you waiting for? Now you can access all your inboxes (Gmail, Outlook, AOL and more) in one place. Never delete an email again with 1000GB of free cloud storage.

_________________________________________________________________
Directorate General of Mines Safety, Ministry of Labour & Employment, Govt. of India   
Websites: http://www.dgms.net and http://www.dgmsindia.in and http://www.dgms.gov.in
--------------------------------------------------------------------------------------------------------
If for any reason you wish to unsubscribe from DGMS Mailing List, send an email to:
dgms_mail_list-unsubscribe@yahoogroups.com

.

__,_._,___

0 comments:

Post a Comment